Menu
Support
Technische Bibliothek

Technische Bibliothek

In unserer Fachbibliothek bieten wir Ihnen eine große Auswahl an technischen Leitfäden und Abhandlungen zu unseren Produkten im Speziellen und im Allgemeinen - sowohl in englischer und deutscher Sprache. Mit dem praktischen Filter können Sie unseren Bestand durchsuchen oder Ihre Suche für bestimmte Anwendungsbereiche verfeinern. Bitte beachten Sie, dass Sie ein Konto erstellen müssen, um auf unsere Ressourcen zu greifen zu können.

 Hier können Sie jetzt ein Konto eröffnen

Nach Anwendung filtern
    Artikel anzeigen 1 - 10 von 191 insgesamt
Preventive maintenance of rolling stock
The test and maintenance of electrical components on rolling stock is not an easy job to do. Some maintainers dismount some of the parts and bring them to a central location for revision and maintenance. This is a cumbersome and time consuming exercise. In many cases, the electrical parts are replaced only when they break down and are not subject to periodical testing. This of course holds a risk as some parts, e.g. circuit breakers, are crucial for safety reasons.
Veröffentlicht: 3 November 2020
Download PDF
Remote Time Sync - MPQ
The MPQ software can be configured to automatically sync the remote MPQ to the network time periodically. This saves the expense of a GPS and removes the possibility of losing the GPS signal.
Veröffentlicht: 4 September 2020
Download PDF
Remote control - MPQ
The MPQ can be controlled remotely using the Metrosoft PQ PC software. This app note shows how to do this.
Veröffentlicht: 4 September 2020
Download PDF
Comtrade export - MPQ
A Comtrade Export feature is valuable when analyzing protection devices. It can help determine why a protection device is tripping or it can help determine if the protection device will trip under particular real world conditions.The MPQ analyzer can be left in the field for months or years at a time. During this time,it will record multiple real world events. These events can then be exported as a Comtrade file and then can be played back to protection devices tosee how they react.
Veröffentlicht: 4 September 2020
Download PDF
Delta measurement with an MPQ1000
The power measurement for a delta configuration uses a 2 wattmeter method even thoughthereare 3 phases.When measuring a wye all the voltages are referenced to neutral, referred to as line voltages. The measured currents are also line currents. Since both the voltage and currents are line values,the measurement does not introduce any phase shift.
Veröffentlicht: 4 September 2020
Download PDF
Delta measurement with an MPQ2000
The power measurement for a delta configuration uses a 2 wattmeter method even thoughtheyare 3 phases. When measuring a wye,all the voltages are referenced to neutral,referred to as line voltages. The measured currents are also line currents. Since both the voltage and currents are line values,the measurement does not introduce any phase shift.
Veröffentlicht: 4 September 2020
Download PDF
AUTO data analysis with the MPQ
The Metrosoft PQ software has a powerful data analysis feature. This feature allows you to automatically analyze the recorded data and see what parameters are out of requirements.To use this feature the nominal recorded voltage and frequency needed to be entered. However these values can change from recording to recording.A new AUTO option has been added to the data analysis screen.
Veröffentlicht: 4 September 2020
Download PDF
Case Study on IDAX300 and VAX020
The Power Grid Corporation of India Limited (PGCIL) is an Indian state-owned company headquartered in Gurugram (North India) engaged mainly in Trans-mission  of  Power  and  transmits  about  50%  of  the  total  power  generated  in  India  on  its  transmission  network.  The  company  owns  and  operates  about  1,61,790  circuit  kms  of  transmission  lines  at  800/765 kV,  400 kV,  220 kV  &  132 kV EHVAC and +500 kV HVDC levels and 248 sub-stations. Also, it has the transformation capacity of about 396 825 MVA as of 30th November 2019.
Veröffentlicht: 26 August 2020
Download PDF
TTRU3 Factory ratio testing of power transformer
Transformer equipment manufacturers (OEMs) have a critical need to measure true ratio, as they must confirm proper manufacture of their transformers during construction and final assembly. Improper construction has consequences of higher cost, late delivery, and poor quality. The ability of a ratio instrument to be used for all steps involved makes it a practical valueto OEMs because only one instrument is purchased and used throughout each stage. Only the most reliable and accurate instruments make it to the factory floor. Winding stack under constructionre used: Art Mandigo Winding Service.
Veröffentlicht: 3 August 2020
Download PDF
DLRO2: long test lead test mode
When measuring very low resistance the four-wire test method has for many years been the standard method. The main advantage being that it simply and easily removes the resistance of the test leads from the measurement. However, what happens when those test leads need to be verylong?
Veröffentlicht: 27 Juli 2020
  • 1
  • 2
  • 3
  • 4
  • 5
  • ...
  • >
  • Artikel anzeigen 1 - 10 von 191 insgesamt